Rivet Solid Plate Fastening System is recommended for high-tension applications, with a staggered, multiple-point attachment for a long-lasting hold. Ideal for use with straight-warped belts because rivets separate the fibers instead of displacing the carcass.

Bolt Solid Plate Fastening System produces a strong, sift-free splice with superior holding ability thanks to a combination of top-and-bottom plate compression and high-tensile-strength bolts.

Rivet Hinged Fastening System is ideal for use on rubber-plied and PVC solid woven belting and for worn belts unfit for vulcanized splices, delivering performance and long life with easy installation

Flexco Belt Cutters minimize the danger of accidental injury during the belt cutting process.

Advantage:

• Portable
• Straighter, faster cuts
• Safer than utility knives - Operators are protected from cutting edge of blades during operation.
• Accurate, consistent cuts

Belt Lifter puts an end to pry bars and manual lifting, making a difficult and hazardous job easier and safer.

Primary belt cleaners are designed to scrape material off the conveyor belt. Primary cleaners are mounted to the head pulley, below the material flow. They are ideal for removing large pieces of material typically about 60-70 percent of initial carryback.

Secondary cleaners are built to scrape materials left on the belt beyond the head pulley. Secondary cleaners are located just past where the belt leave the head pulley, and anywhere else down the beltline. Secondary cleaners are especially good at removing fines and can increase cleaning efficiency to more than 90 percent.

Flexco belt trainers use a combination of friction and tension to correct alignment issues and avoid forces that can damage your belt and your structure. Our unique"Pivot and Tilt" technology is used in many of our designs to respond and compensate immediately to belt misalignment.